ເກຍ ໜອນ ທີ່ມີວັດສະດຸທີ່ທົນທານຕໍ່ການສວມໃສ່ໃນລົດຄວາມໄວລົດເຂັນ winches ຂອງອັດຕາສ່ວນການສົ່ງຂະ ໜາດ ໃຫຍ່

Quick Detail:
1. Worm wheel / worm drive

2. Used in mechanical transmission system such as cranes, winches, etc.

3. Available: reduction ratio 10~300.

Worm gear mechanisms are often used to transmit motion and power between two interleaved shafts. The gear reduction ratio of worm gears is generally 20:1, and sometimes even as high as 300:1 or greater. Worm gears have following characteristics:

- A large transmission ratio can be obtained, which is more compact than a cross-shaft helical gear mechanism.

- The meshing tooth surfaces of a worm gear and a worm are in line contact. Its load-bearing capacity is much higher than that of a cross-axis helical gear mechanism

- A worm drive is equivalent to a spiral drive, which is multi-tooth meshing transmission. The transmission is stable and the noise is small.

- A worm gear mechanism is self-locking, which can realize reverse self-locking, that is, only a worm can drive a worm wheel, and the worm cannot be driven by the worm wheel.

- The transmission efficiency is low and the wear is serious.

- The axial force along worm is large.

Worm gear mechanisms are often used in situations where two shafts are interleaved, the transmission ratio is large, the transmission power is not large, or the operation is intermittent. Typical application of worm gear in mechanical transmission system includes speed reducers, cranes, winches, etc.

- capability of customization of worm gear from drawings, 3D models, or simple part.

- capability of non-standard worm gear manufacturing.

- ຄວາມສົມບູນຂອງຂະບວນການຜະລິດລວມທັງການເລືອກວັດສະດຸ, ການປັ້ນ, ການຕັດເຄື່ອງອັນດີ, ການຂັດ, ການປິ່ນປົວຄວາມຮ້ອນ, ແລະການຮັກສາພື້ນຜິວ, ແລະອື່ນ.