ໂທ​ຫ້ອງ​ການ​: + 86 152 0161 9036

E​-mail​: [email protected]

EN
ທຸກຫມວດຫມູ່

ເກຍເກຍ

ໜ້າ ທຳ ອິດ>ຜະ​ລິດ​ຕະ​ພັນ>ເກຍກະປຸກ>ເກຍເກຍ

Rack Gear Straight and Helical Gear ທີ່ມີຄວາມແມ່ນຍໍາສູງໃນເຫຼັກເສັ້ນລວດໃນການຂັບເຄື່ອນທາງເສັ້ນແລະມີການສົ່ງເຄື່ອງຈັກ ໜັກ ທີ່ສາມາດໃຊ້ໄດ້

ສະ​ຖານ​ທີ່​ຕົ້ນ​ກໍາ​ເນີດ:

ແຂວງ Jiangsu, ປະເທດຈີນ

ຊື່ຍີ່ຫໍ້:

JIANGSU WANAN ອຸດສາຫະກໍາຫນັກ CO., LTD.

ຈໍານວນຮູບແບບ:

G-3

  • ລາຍລະອຽດ
  • ຂໍ້ມູນຈໍາເພາະ
  • ຄໍາຮ້ອງສະຫມັກ
  • Advantage Competitive
  • ການສອບຖາມ
ລາຍລະອຽດ

Quick Detail:
1. Rack/ rack gear/ toothed bar/ toothed rack

2. Used in synchronization mechanism, linear guides, machine tools, manipulator,  etc.

3. Available: length<= 2 meters

ຈໍານວນສັ່ງຊື້ຂັ້ນຕ່ໍາ:

1

ລາ​ຄາ​:

ຂຶ້ນຢູ່ກັບສະເພາະ

ລາຍລະອຽດການຫຸ້ມຫໍ່:

ກັນຮອຍຂີດຂ່ວນ, ກັນrustຸ່ນ, ກັນampຸ່ນ, ຫຼືຕາມຄວາມຕ້ອງການ

ເວລາການຈັດສົ່ງ:

ຂຶ້ນກັບປະເທດປາຍທາງ

ຄວາມສາມາດໃນການສະຫນອງ:

ອຸດົມສົມບູນ

A gear rack is a special gear with teeth distributed on a bar-shaped body. It is equal to a segment of the circumference of a gear with an infinite diameter. There are many teeth evenly distributed on one side, meshing with gears, turning rotation into linear movement, or turning linear movement into rotation. The gear racks are also divided into spur racks and helical racks, which are paired with spur gears and helical gears respectively. The tooth profile of a gear rack is a straight line rather than an involute (for the tooth surface, it is a flat surface). It is equivalent to an infinite cylindrical gear with the index circle radius.

ຂໍ້ມູນຈໍາເພາະ

ອຸປະກອນການ

ເຫຼັກຄວາມແຂງແຮງສູງ, ຕົວຢ່າງ. 18Cr2Ni4W, 20Cr2Ni4A, 17CrNiMo6, 18CrNiMo7-6, 20CrMnTi, 40CrNiMo, 30CrMnSi, 27SiMn, 35CrMo, 42CrMo, 40Cr, ແລະອື່ນ

ໂມດູນ (ມມ)

0.5 ~ 10

ຄວາມຍາວທັງ ໝົດ (ມມ)

100 ~ 2000

ແຂ້ວ ສຳ ເລັດຮູບ

ມາດຕະຖານ, ຄວາມແມ່ນຍໍາສູງ

ປະເພດແຂ້ວ

Straight teeth, helical teeth

ແຮງບິດທີ່ອະນຸຍາດ (Nm)

0 ~ 22000

ຄໍາຮ້ອງສະຫມັກ

(1) Synchronization mechanism. The synchronization mechanism of a gear rack is generally used in case of cylinder array power, hydraulic cylinder array power to ensure power synchronization and prevent movement mechanism from stalling and uneven motion caused by low processing accuracy.

(2) Movement direction conversion. A gear rack and pinion mechanism is an approach to convert linear motion into circular motion. In practical applications, it can be used with air cylinders and hydraulic cylinders. Under normal circumstances, the linear motion of a gear rack can be installed with linear guides and sliders.

(3) Motion output. A gear rack can be directly used as a motion output component and can be applied to the end effector of a manipulator and a driving mechanism of up and down movement.

Advantage Competitive

- capability of customization of gear rack from drawings, 3D models, or simple part.

- capability of non-standard gear teeth of gear rack manufacturing.

- ຄວາມສົມບູນຂອງຂະບວນການຜະລິດລວມທັງການເລືອກວັດສະດຸ, ການປັ້ນ, ການຕັດເຄື່ອງອັນດີ, ການຂັດ, ການປິ່ນປົວຄວາມຮ້ອນ, ແລະການຮັກສາພື້ນຜິວ, ແລະອື່ນ.

ການສອບຖາມ